Naar de inhoud
Localtonet Localtonet Dashboard

Deze pagina is nog niet beschikbaar in het Nederlands. Ze wordt in het Engels getoond.

Configure a Network and IP Address

If you have more than one IP on your device and want these IPs to be selected from different tunnels or localtonet applications, here is how to do this.

Handleiding 1 min leestijd Bijgewerkt op vrijdag 28 augustus 2026 Lees het volledige blogbericht

Hulp bij deze pagina
Op deze pagina 1 sectie
  1. Save the arguments
  2. For Localtonet
  3. For one tunnel

Run Localtonet on a specified network and IP address globally or for an individual tunnel.

Prerequisite: Localtonet v6.6 or later.

  1. List detected networks and identify those with internet access:

    localtonet --network
  2. Start Localtonet with the required network and IP address:

    localtonet --net [networkname] --ip [ipaddress]

    Replace [networkname] with the network name and [ipaddress] with the IP address.

Save the arguments #

For Localtonet #

  1. Open the My Token page.

  2. Under Settings, enter --net [networkname] --ip [ipaddress] in the Arguments field.

  3. Save the settings.

For one tunnel #

  1. Open Tunnel Settings for the required tunnel.

  2. Enter --net [networkname] --ip [ipaddress] in the Arguments field.

  3. Save the configuration. These settings apply only to the selected tunnel.

Support